New Emmegi Saws for Aluminum

Emmegi Saws for Aluminum

With Emmegi Saws you can be assured of getting vibration free sawing, chatter-free surfaces on cut pieces, clamping features that allow a variety of fixturing and exact feeds and speeds for exceptional finishes.

Emmegi Automatica / S

Available in sizes from 450 mm (18") blades to 650 mm (26") blades

Automatica 450: 6" diameter - 5" x 8" extrusion
Automatica 500: 7" diameter - 4" x 10" extrusion

Automatica 550: 8" diameter - 6" x 10" extrusion

Automatica 600: 9" diameter - 4" x 13" extrusion

Automatica 650: 10" diameter - 8" x 12" extrusion

Models 450/500/550 have hydra-pneumatic blade feed and 5.5HP, 2800 RPM motors
Models 600/650 have hydraulic blade feed and 7.5 HP, 2260 rpm motors (10HP optional)
Cutting cycles are controlled by PLC
All models feed up to 800 mm (31-1/2") in a single stroke with 3 stroke feed for a total feed of 94-1/2"
Tolerances of +.004"

Emmegi Automatica / E

Electric version of the above saw with 1000 mm (39-5/8") feed stroke

Feed is controlled electronically with a lead screw feed for length tolerances
of +.002"

Emmegi Single Cut Miter Saws

Model 450/500/550 SCA

Capacities

at 90 deg

at 45 deg

450 SCA:

18" blade

4" x 9"

3" x 5"

500 SCA:

20" blade

6" x 8"

4" x 7"

550 SCA:

Emmegi Model 400 SCA/P

Capacities	at 90 deg	at 45 deg
16" blade	4" x 7"	3" x 5"
(cutting chart available for additional sizes)

2 HP motor, 2800 rpm
Miter cuts to 45 degrees both right and left
2 each horizontal and vertical clamps
Pneumatic spray mist system

" blade

6" x 9"

3" x 8"

(cutting charts available for additional sizes)

5.5 HP motor, 2800 rpm
Miter settings to 20 deg right and left from backstop
Digital readout on miter setting
2 each horizontal & vertical clamps designed for ease of fixturing
Pneumatic spray mist system
Hydra-pneumatic operation

Emmegi Model 650 SCA/E

Horizontal miters to 22 deg 30' - vertical miters to 35 deg
26" carbide tipped saw blade
3 vertical and 1 horizontal pneumatic clamp
Hydraulic blade feed
7.5 HP, 1650 rpm motor
Digital display for setting miters
2 position back fence for wider cuts

Emmegi Model 550/600/650 FIX

Heavy Duty Semi-Automatic Saw for 90 Degree Cuts

Blade Size	Capacity	Extrusion
550 mm (22")	8" diameter	6" x 10"
600 mm (24")	9" diameter	6" x 12"
650 mm (26")	10" diameter	8" x 12"
(cutting chart available for additional sizes)

550 FIX has 5.5 HP, 2800 rpm motor and hydra-pneumatic operation
600 and 650 FIX machines are totally hydraulic with 7.5 HP, 2260 rpm motor
2 each horizontal and vertical pneumatic clamps designed for ease of fixturing
Adjustable pressure gauges for vising
Lubrica "pulse style" oil lubrication
Back fence is adjustable for additional 8" width in cutting capacity

Emmegi FIX / S Models

Machine as described above with material separation feature
to provide enhanced finishes and longer blade life

Emmegi Length Stops and Conveyors

Available in manual, digital and programmable styles from 2150 mm (84-1/2") to 4200 mm (165") lengths
Model Fermo VIS has hand wheel and digital readout in inch and metric, with pneumatic lock end stop
Model Microbo is totally programmable with 99 job memory and RS232 port. Stop device swivels automatically.
A wide variety of infeed and outfeed conveyors are available to be matched to the saws above

Emmegi MG4 Chip Collector

Built by Emmegi to reduce the noise levels of most ordinary chip collectors

Capacity 2000 M 3 per hour
3 HP motor
Auto start

Emmegi Double Head Miter Saws for Aluminum

Emmegi double head saws are available from simple miter "pivot style" to full CNC operation. From 14" to 22" saw blade capacities. Lengths range from 4 meter (13 feet) to 6 meter (19-1/2 feet).
Longer lengths upon request.

Horizontal and vertical mitering to 22 degrees 30':
Combination models for vertical and horizontal mitering