New Clausing Metal Muncher

Adjustable stroke length up to 9"

Up to 3" ram size... Easily adapts to accept over-size/special tooling

Easy to change punch and die holder. Die block easily removed to accept unlimited accessories

Swing-away stripper gives ready access to the ram stem and makes punch changing quick and easy

Standard large throat design increases versatility by accepting special tooling/die sets

Standard large table gives the user and ideal work area and accepts up to a 48" brak

Clausing Metal Muncher GB Series
Gap-Bed Hydrau

Clausing/Metal Muncher GB Series is ideal as a dedicated Punch Press, but easily accepts a wide range of standard and optional accessories or can be fitted with special tooling to allow shearing or forming. The GB Series is a great buy for any shop that needs a solid, dependable, dedicated Punch Press, yet needs the ability to expand the capabilities of a press to allow shearing or forming for special jobs. Available in 40-ton through 135-ton standard models, the 40-ton machine has a 7" x 9" throat and 70-ton, 100-ton and 135-ton machines come standard with a 9" x 14" or a 18"

Clausing Metal Muncher Punch Accessories

Gauging Table

Heavy-duty table and adjustable roller stops allow easy material handling and multiple hole production

Portable Work Lamp

24" gooseneck lamp with magnetic base

Clausing Metal Muncher Shear Accessories

Flat Bar Production Plate

Material support table with squaring arm 12" x 24"

Coper-Notcher Production Plate

Material support table with squaring arm 18" x 18"

Hy-Performance Blade

Increases flat bar shearing capacity to 3/8" x 24" on 70 ton models and larger

Over-sizes 28XX & Special
Punches and Dies

Up to 6" diameter and large

Adjustable Work-Support Rollers

Fit on each end of press table (70 ton models and larger)

Shear Point (Picket) Tooling

Rod Shear

Mitering Angle Shear

Shear angles up to 6" x 6" x 1/2" at 90 degrees and 5" x 5" x1/2" at 45 degrees (70 ton models and larger)

Channel Shear

Cuts 2" to 8" standard channel/mild steel (70 ton models and larger)

Pipe Shear

Shear and pinch pipe or tubing up o 2-1/2" O.D.

Pipe Notcher

Sizes up to 3-1/2" O.D./pipe and round & square tubing

Special Brake Die Holder

with 9/16" slot in upper & lower to accommodate Press Brake Tooling (tooling not included)

Standard 4-Way Brake Set

Forms bends/lengths from 18" to 48" std.

Structural Die Block

Punch flanges and web on channel 3" thru 8" wide 1-1/4" O.D. Die

Press Production Table

16" x 36" std. Other sizes available.

x 18" throat. For a dependable Punch Press that will give you years of reliable service the Clausing/Metal Muncher GB Series should be your first choice.

lic Punch Press

eset and large special tooling

All work stations are at approximately the same height, for ease in material handling

Press cylinder is foot pedal activated... (rear electric foot control for shear end available)

Includes complete electrics... 220/440v standard, other voltages available at additional cost by request

Comes complete with hydraulic oil... ready to operate. Lubrication points are marked and easily accessible.