Westbrook Engineering Carries the Line of Techni Waterjets!

Potential Problems Detected by Tech Sense:

Low abrasive being delivered to the cutting head
- Possible causes - moist abrasive, blocked feed line due to foreign particles or kinked feed hose
Plugged focusing tube
- Possible causes - focusing tube too close to work piece, foreign material in tube
Damaged Orifice
- Possible causes - general wear or erosion, foreign particle, poor water quality
Water Pressure Drop
- Possible causes - intensifier problem, high pressure hose leak, dump valve leak, cutting head leak.
Inefficient Cutting Head Set-Up
- Possible causes - too much or too little abrasive, cutting head loose, focusing tube not seated, orifice not assembled properly

This remarkable patented technology will dramatically increase your profitability by reducing scrap, increasing Up Time and Reducing Labor, and minimizing consumables.

No longer will you require a person to stand idle and watch a machine 'just in case' there is a problem. The Tech-Sense will activate an audible alarm and a flashing light will warn an operator if the machine is not running efficiently, and will pause the machine if the problem could potentially damage the part or material being cut.

When integrated with the "SMS Offsite Notification" you are free to leave the site altogether, making lights out operating a reality.

Techni Waterjet TechJet-X2 "Premium Series"

The Techjet-X2 series is the latest in our evolution of innovative products to create a precision, easy-to-operate, safe and highly reliable Waterjet Cutting Machine. The Techjet-X2 is built to the highest tolerances and incorporates Linear Scale Feedback to ensure the highest accuracy of motion in the industry. By mapping the entire cutting area witha laser-calibrated digital encoder, the motion system can deliver positional accuracy of 0.0005" (0.01mm)

Techni Waterjet Techjet-X2 Features

Linear Encoder Feedback with laser-calibrated mapping, offers the greatest accuracy in the industry
Submerged cutting for almost silent operation.
Fully enclosed bellows to completely protect the linear bearings and drive system.
Stainless Steel apron to protect the machine when loading/unloading.
Power 'Z' axis.
Precision Stainless Steel Band drive providing smooth movement at rapid speeds with extreme accuracy.
Tech-Sense to monitor the cutting head and pause the program prior to any blockage, making "Lights OUt" operating a reality.
AT2010 controller with MPEG Feed Wheel.
Crash Sensing Break Away Head to protect your valuable investment.
High or Low pressure cutting and piercing.
Self diagnostic alarms window.
Localized controls.
Rotating control panel with retractable mouse pad.

Techni Waterjet Options Available

1/2 ton (500kg) Jib arm and 2 stage vacuum end-effector for easy material handling.
Waste garnet recovery system.
Abrasive Waste Removal Systems from 200-1000 lbs (100-500kg) capacity.
Twin cutting heads for increased production.
Floating 'Z' axis to maintain 'stand-off' on warped materials.
Text messaging protocol which enables 2-way communication between machine and mobile phone.
Light Curtain Guarding System ensures maximum worker safety.
EZY-Load material loading mechanisms available in 250lb (120kg), 660lb (300kg), 1100lb (500kg) load capacities.

For Sale:
$175,000 New
Demo Price: $150,000
Click here to view full quote

This will never happen on a Techni Waterjet!

Above is pictured a new and 5 year old pinion on another brand waterjet. All other waterjets use rack & pinion or ball screw drive systems. They all eventually wear and become sloppy due to abrasive invasion. Techni uses a stainless band drive and linear ways which are impervious to abrasive invasion!

Learn more about the Techni Quantum Electric Servo Pump