Specifications:

Capacity	Rectangular (h x w)	Round
90º	13” x 18”	13”
45º	13” x 10 ¾”	12”
30º	13” x 7 ¾”	8½”

Blade Size	1” x 14’10”
Blade Drive	3Hp VFD
Blade Speed	45-330 SFM
Coolant Tank Capacity	6 US gal
Mitering	90º to 30º
Weight	2200 lbs
Work Load	5,000 lbs.
Table Height	31”
Dimensions (w x l x h)	92”W x 75”L x 52”H

STANDARD EQUIPMENT:

• Robust steel base manufactured from heavy gauge plate and electro welded components, with a 6 gal. coolant tank built in. Includes leveling bolts
• 36” in-feed rollers and 19” out feed table
• Easy SWING, heavy duty Cast Iron saw headframe,with Counter Balance Springs and easy to read scale for head position in 1o increments (90o to 30o mitering). A cam lock brake provides reliable locking at the desired angle
• Premium cast band wheels with flanged back.

	Powerful Variable Frequency Drive 3Hp motor with an A/C inverter provides infinetely varibable band speed allowing for efficient cutting of various applications
	Premium cast iron, heavy-duty guide arms equipped with replaceable and pre-set carbide inserts (no adjustment needed) for accurate cutting. The idler side guide arm is adjustable for proper spacing and movement supported by a linear bearing
	Powered blade brush driven off blade drive
	A “Swing Away” Control Console houses switches for blade start, band speed control, fast approach button, coolant control, a graduated feed rate valve with, digital readout for blade tensioningand E-Stop button. The consoles Swing Arm allows for optimum ergonomic position.

• Mechanical tensioning, with a digital readout at the control panel to ensure accurate blade tension. Machine will not operate unless proper band tension is applied.
• Heavy duty sliding vise jaw, with locking lever securely clamps material, either long or short, against a fixed vise jaw.
• A centrifugal pump delivers ample coolant on the cutting area. The coolant flows through both drive and idler guide arms with flow valves for quantity adjustment
• Wash down hose is mounted at front of the machine
• Project a crisp line of laser light along the blade line. This feature can be used for fast length measurements or as a cut marker.
• Work light positioned on the top of the head, equipped with a flexible stem allows for easy   positioning over cutting area.