Specifications (rated on 65,000 PSI Tensile)

Work stations:	5
Punching
Punching pressure:	66 ton
Punch capacity:	7/8” x ¾” (diameter x thickness)
	1-1/2” x 7/16”
Throat depth:	7-7/8”
Maximum stroke length:	1-1/2”
Cycle per minute (9/16”):	34
Punching station work height:	41-1/4”
Flat Bar Shearing
Flat bar shear:	14” in 5/8”
Width and thickness:	10” in 11/16”
Blade length:	14-1/4”
Work height:	31-3/4”
Angle Shear
90°:	4” x 4” x 5/16”
45°:	n/a (can do in plate shear)
Work height:	42”
Bar Shearing
Round bar:	1-1/2”
Square bar:	1-1/2” x 1-1/2”
Channel shear:	4” Max. (Optional)
H-beams:	4” Max. (Optional)
Work height:	41-1/4”
Notching
Rectangular notcher:	2” x 3-1/2” x 5/16”
Large V:	-
Work height:	41-1/4”

 

Standard Equipment

• Five sets of punch and dies:           9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
• Magnetic base work light
• 24 Volt DC control voltage
• Scrap box at punch and notching stations
• Hydraulic hold-downs at angle, plate, round and square bar
• Adjustable electric back gauge:     (36”)
• Adjustable stroke depth at punch station
• Full Control foot pedals
• Two full control foot pedals with two hydraulic cylinders
• Keyed punch holder for shaped tooling
• Two piece gauging table at punch station
• Machine dimensions:         47” x 30” x 64”
• Machine weight:                   2,900 lbs.
• Drive motor:                         7.5 HP