Specifications:
(Based on 80,000 PSI A36 steel)

Capacity:	1/4" x 10'
Rake angle:	1/4" per ft. (1 degree)
Knife size:	1" x 3"
Knife length:	124"
Strokes per minute (min/max):	22/42
Motor:	20 HP
Electrics:	220/440/3/60
Number of hold downs:	16
Hold down tonnage:	16
Approximate weight:	17,000 lbs.

Federal law will not allow machines to be transported with hydraulic oil. 
Most Accurpress machines require one - 55 gallon drum of hydraulic oil of a
Mobil DTE26 or equivalent to fill reservoir.

  Accurshear Standard Features and Options

  Construction Features:

¨   Welded construction with boxed-in-bed design for maximum strength
¨   Low fixed rake angles to reduce:  bow/twist/camber

6250 Series:

1/4”per/foot

¨   Shearing capacities rated at 80,000 tensile/44,000 Yield structural quality steel

¨   Four-edge blades top and bottom:  modified  high carbon high chrome with shock resisting characteristics

¨   4’ Squaring arm c/w steel rule with 1/16” increments and 1mm increments

¨   Flip-up squaring arm stop

¨   Manual quick blade clearance adjustment adjusted via lever on side of machine

¨   T-slots left-right in front of shear for mounting support arm fixtures

¨   Shadow light and line

¨   Two handslots in table

 

Control Console

¨   Machine on/off buttons

¨   Three mode selection switch:  Jog/Manual/Auto

¨   SC2 backgauge control mounted on pendant arm:

--Numeric keypad

--Programmable backstop retract

--LED display in .001”

--Stroke counter

--99 Programmable pre-select positions

--Stroke length setting

--Sequential single step programming

--Hour meter

--Go-to-position function

Power Backgauge

¨   Heavy duty design incorporating precision acme lead screws running on roller bearings

¨   36” Backgauge travel

¨   Automatic backgauge stop bar flip-up at the 36” or 48” travel

Hydraulics and Electrics

¨   Wired to NFPA79 and ANSI B11.4 Electrical Standards

¨   Footswitch control

¨   Hydraulic reservoir mounted behind and above ram stiffener in a safe and accessible location

¨   Complete overload protection

¨   High quality precision honed hydraulic cylinders, incorporating inductioned hardened chrome plated piston rods with low friction, zero leak seals

¨   Oil cooler for optimum running temperatures