23501 Mound Road
Warren, MI 48091-2048
Tel: (800) 899-8182
Fax: (586) 759-3106
www.westbrook-eng.com
23501 Mound Road
Warren, MI 48091-2048
Tel: (800) 899-8182
Fax: (586) 759-3106
www.westbrook-eng.com
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
NEW ACCURPRESS HYDRO-MECHANICAL PRESS BRAKE
MODEL
7-250-12
Specifications
Tonnage:
|
250
|
Length
of bed/ram:
|
12’
|
Capacity:
|
10’
x 3/8” or 12' x 5/16” (mild steel)
|
Distance
between housings:
|
124"
|
Length
of stroke (variable):
|
8"
|
Ram
– fast approach:
|
60” IPM
|
Ram
– slow bend:
|
19" IPM
|
Ram
– fast return:
|
140" IPM
|
Die
opening, ram up:
|
16"
|
Die
opening, ram down:
|
8"
|
Throat
depth:
|
10"
|
Bed
height:
|
34"
|
Bed
cap width:
|
5.5”
|
Main
motor:
|
20
HP
|
Overall
dimensions:
|
168”
length x 60” width x 93” height
|
Approximate
shipping weight:
|
29,000
lbs.
|
Distance
below grade (bed only):
|
None
|
Federal law will not allow machines to be transported with
hydraulic oil. Most Accurpress
machines require one - 55 gallon drum of hydraulic oil of a Mobil DTE26 or equivalent to fill reservoir.
Construction Features
¨ Precision bolt-together and welded frame
construction for maximum strength and rigidity
¨ Flush floor design for models 7606 thru 750014
¨ Bed and ram engineered with optimum crown to minimize shimming of
dies
¨ T-slots machines front-back in bed cap for securing die holder
¨ Heavy duty ram gibbing guided by lifetime lubricated slideways
¨ Power ram tilt control
¨ Hard ram inserts standard on all models 7500 ton and larger
Control
Station
¨ Three position footswitch / dual palm push buttons
¨ ETS PLC system includes:
|
-
|
Four line LCD
display
|
|
-
|
Numeric keypad
|
|
-
|
15 Ram program
memory
|
|
-
|
Programmable
high/slow/bend positions
|
|
-
|
Programmable auto
cycle time delay
|
|
-
|
Tonnage select
|
|
-
|
Inch/metric
conversion
|
|
-
|
Machine start/stop
buttons
|
|
-
|
Emergency stop/ram
return buttons
|
|
-
|
Operator
lock/unlock key
|
|
-
|
Operator mode
selector: jog/manual/auto
|
|
-
|
Double stop
footswitch circuit: on/off
|
|
-
|
Hand/foot transfer
circuit: on/off
|
|
-
|
Power ram tilt
control buttons
|
Hydraulics
and Electrics
¨ Wired to NFPA79 and ANSI B11.3 Electrical Standards
¨ Side mounted hydraulic and electrical package for 7305 thru
732020 models
¨ Rear mounted on larger models
¨ Tonnage control via key selection on ETS100 control
¨ Adjustable bending speed control via rotary dial on hydraulic
unit
¨ High quality precision honed hydraulic cylinders, incorporating
inductioned hardened chrome plated piston rods with low friction, zero leak seals
¨ Oil cooler for optimum running temperatures
Paint
Color
¨ Machine Tool Grey for 7606 thru 717514 models
¨ Safety Green for 717516 and larger models
ETS 100 Servo-controlled Single
Axis CNC backgauge
¨ X-axis backgauge control (in-out)
¨ Four line LCD display from OSHA pedestal
¨ 15 Programs: one ram step, five backgauge steps per program
¨ Inch/metric conversion
SIZES AVAILABLE
|
STANDARD GAUGE
UP TO 250 TON X 12’
|
PREMIUM GAUGE
ANY SIZE BRAKE
|
X-axis travel:
|
24” with dual
ball screw drive
|
24” with dual
ball screw drive
|
Gauge speed:
|
900 IPM
|
1200 IPM
|
Gauge bar length:
|
108”
|
120”
|
Distance between
dual ball screw drives
|
38”
|
58”
|
Precision finger
stops:
|
Two supplied,
featuring micro adjustment, shock absorbing tension and flip-up
|
Two supplied,
featuring snap change flip-up fingers w/ 3 gauging positions
|
Gauge
repeatability:
|
± .002”
|
± .001”
|
Holding force:
|
600 lbs.
|
750 lbs.
|
Gauge bar vertical
adjustment:
|
10” manual
|
10” manual
|
ETS 200 Servo-controlled Two Axis CNC backgauge
¨ X-axis backgauge control (in-out) and Y-axis ram control via
.001” increments
¨ Four line LCD display from OSHA pedestal
¨ 100 Programs: 9 steps per program
¨ Inch/metric conversion
¨ Programmable bend allowance
¨ Programmable tonnage reversal
SIZES AVAILABLE
|
STANDARD GAUGE
UP TO 250 TON X 12’
|
PREMIUM GAUGE
ANY SIZE BRAKE
|
X-axis travel:
|
24” with dual
ball screw drive
|
24” with dual
ball screw drive
|
Gauge speed:
|
900 IPM
|
1200 IPM
|
Gauge bar length:
|
108”
|
120”
|
Distance between
dual ball screw drives
|
38”
|
58”
|
Precision finger
stops:
|
Two supplied,
featuring micro adjustment, shock absorbing tension and flip-up
|
Two supplied,
featuring snap change flip-up fingers w/ 3 gauging positions
|
Gauge
repeatability:
|
± .002”
|
± .001”
|
Holding force:
|
600 lbs.
|
750 lbs.
|
Gauge bar vertical
adjustment:
|
10” manual
|
10” manual
|
ETS 2000 Two axis servo controlled CNC back gauge
¨ X-axis backgauge (in-out) and Y-axis ram control programmed via
degrees
¨ Programmed via high resolution 10.4” passive matrix screen
from hanging pendant
¨ Menu driven programming: catalogue,
calibrate, manual, program, teach and run modes
¨ 2000 Programs / 50 steps per program
¨ Tool library / 100 tool sets
¨ Programmable tonnage reversal per step
¨ Programmable stroke length, speed change point
¨ Automatically calibrates axes and calculates bend allowances
¨ Bend allowances and single corrections for a given die set and
material are stored for future use.
¨ Programmable backgauge retract distance per step
¨ Processed workpiece counter: Count up or down (0-9999)
¨ Off-line program storage via RS-232 link or 3.5 diskette. File storage is DOS and Windows compatible
¨ Inch/Metric conversion
| SIZES AVAILABLE |
STANDARD GAUGE
|
PREMIUM GAUGE
|
| X-axis travel:
|
24” with
dual ball screw drive
|
24”
with dual ball screw drive |
| Gauge speed:
|
900 IPM
|
1200
IPM |
| Gauge bar
length:
|
108”
|
120” |
| Distance between
dual ball screw drives:
|
|
|
| Precision finger
stops:
|
Two supplied,
featuring micro adjustment, shock absorbing tension and flip-up
|
Two
supplied, featuring snap change flip-up fingers w/ 3 gauging positions |
| Gauge
repeatability:
|
+ .002”
|
+ .001” |
| Holding force:
|
600lbs.
|
750lbs. |
| Gauge bar
vertical adjustment:
|
10” manual
|
10”
manual |
ETS 3000 Servo controlled multi-axis CNC backgauge
¨ X-axis backgauge and Y-axis ram control (R-axis gauge bar up-down
and Z1, Z2 fingers right-left available)
¨ Programming via high resolution 12.1” TFT active matrix
screen/pendant mounted
¨ Intuitive, part driven, graphical programming
¨ Operator prompts and on-line help messages
¨ Y-axis programmed via degrees
¨ Programs stored and sorted by 30 character job name
¨ Bend sequencing and part editing
¨ Customer and operator information, run time, set up time can be
stored and displayed
¨ Control memory capacity: 3000
programs / 50 steps per program
¨ Tool library/ 100 tool sets
¨ Programmable tool set per step – up to three sets per
program
¨ Tool library: created
by operator via parametric models
¨ Automatically calibrates axes and calculates bend allowances and
blank lengths
¨ Bend allowances and angle corrections for a given die set and
material are stored for future use.
¨ Programmable tonnage reversal per step
¨ Programmable backgauge retract per step
¨ Processed workpiece counter: Count up or down (0-9999)
¨ Bend simulation: checks
for interference and tool overload
¨ Off-line program storage via RS-232 link or 3.5 diskette. File storage is DOS and Windows compatible
¨ Inch/Metric conversion
| SIZES AVAILABLE |
PREMIUM GAUGE
|
| X-axis travel:
|
24” with dual
ball screw drive |
| Gauge speed:
|
1200 IPM |
| Gauge bar
length:
|
120” |
| Distance between
dual ball screw drives:
|
58” |
| Precision finger
stops:
|
Two supplied,
featuring snap change flip-up fingers w/ 3 gauging positions |
| Gauge
repeatability:
|
+ .001” |
| Holding force:
|
750lbs. |
| Gauge bar
vertical adjustment:
|
10” manual |
