Specifications

Tonnage:	60
Length of bed/ram:	6'
Capacity:	6' x 10 gauge
Distance between housings:	52"
Length of stroke (variable):	8"
Ram - fast approach:	130” IPM
Ram - slow bend:	24”   IPM
Ram - fast return:	260” IPM
Die opening, ram up:	14"
Die opening, ram down:	6"
Throat depth:	8"
Bed height:	34"
Bed cap width:	3”
Main motor:	10 HP
Overall dimensions:	88” long x 42” wide x 70” high
Approximate shipping weight:	6,000 lbs.
Distance below grade (bed only):	None

Federal law will not allow machines to be transported with hydraulic oil.  Accurpress machines require  hydraulic oil of a Mobil DTE26 or equivalent to fill reservoir

Construction Features

• Precision bolt-together and welded frame construction for maximum strength and rigidity
• Flush floor design – 7254 through 750014 models
• Bed and ram engineered with optimum crown to minimize shimming of dies
• High quality, maintenance free, self lubricating bearings
• Heavy duty ram gibbing guided by lifetime lubricated slideways
• T-slots machines front-back in bed cap for securing die holder
• Dual ram encoder feedback system for models 7606 – 7100024
• Manual ram tilt adjustment for model 7254
• Hard ram insert standard on all 7500 tons and larger models
• Ram machined for dual safety tang on all 7500 tons and larger models
• Control Station
• Three position footswitch / dual palm push buttons
• ETS PLC system includes:

Four line LCD display

Numeric keypad

15 Ram program memory

Programmable high/slow/bend positions

Programmable auto cycle time delay

Tonnage select

Compensation for oil temperature fluctuations to ensure constant ram accuracies

Inch/metric conversion

Machine start/stop buttons

Emergency stop/ram return buttons

Operator lock/unlock key

Operator mode selector: jog/manual/auto

Double stop footswitch circuit:  on/off

Hand/foot transfer circuit:  on/off

Power ram tilt control buttons

•  
• Hydraulics and Electrics
• UL approved electrical control panel & ANSI B11.3 standards
• Side mounted hydraulic and electrical package
• Tonnage control via key selection on ETS control station
• High quality precision honed hydraulic cylinders, incorporating induction hardened chrome plated piston rods with low friction, zero leak seals
• Oil cooler for optimum running temperatures