23501 Mound Road
Warren, MI 48091-2048
Tel: (800) 899-8182
Fax: (586) 759-3106
www.westbrook-eng.com
23501 Mound Road
Warren, MI 48091-2048
Tel: (800) 899-8182
Fax: (586) 759-3106
www.westbrook-eng.com
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
| Specifications: | Cutting range with std. sawblade dimension of 15.75" |
Cutting range with max. sawblade dimension of 16.75" |
| Single Cut | ||
| 90 degrees: | Round: 5.2" | Round: 5.5" |
| Flat: 10.2" x 3.1" | Flat: 11" x 3.1" | |
| Square: 4.7" x 4.7" | Square: 5.1" x 5.1" | |
| 45 degrees: | Round: 5.1" | Round: 5.5" |
| Flat: 7" x 3.1" | Flat: 9" x 3.1" | |
| Square: 4.3" x 4.3" | Square: 4.7" x 4.7" | |
| Automatic Cut: | ||
| 90 degrees: | Round: 5.1" | Round: 5.5" |
| Flat: 8.2" x 3.1" | Flat: 9" x 3.1" | |
| Square: 4.3" x 4.3" | Square: 4.7" x 4.7" | |
| 45 degrees: | Round: 5.1" | Round: 5.5" |
| Flat: 6.2" x 3.1" | Flat: 6.6" x 3.1" | |
| Square: 4.3" x 4.3" | Square: 4.7" x 4.7" | |
| Auto feed length: | 47.2" (single stroke) | |
| 141.6" Max (3x stroke) | ||
| Saw blade feed speed: | 0.26.4" / min | |
| Rapid return: | 98.5" / min | |
| Clamping vise feed speed: | 66 FPM | |
| Shortest cut-off length (automatic): | ||
| 90 degrees: | 3.9" | |
| 45 degrees: | 11.8" | |
| Main saw motor: | 2.10 HP / 3.40 HP, 220 volt, 3-phase | |
| Hydraulic motor: | 1.5 HP | |
| Coolant pump: | 0.16 HP | |
| Std. speed with 15-3/4" blade: | 36 FPM / 72 FPM | |
| Approximate dimensions: | ||
| Length: | 101" (15'1" w/ dig measuring table) | |
| Width: | 48" | |
| Height: | 75" | |
| Approximate weight: | 2,425 lbs | |
Features:
*Digital measuring stop Model MD-1000 with pneumatic clamping, lifting, and lowering of measuring stop
*Measuring range from 19.6" - 80" with LED readout
*Hydraulic horizontal vise for additional clamping
*Multiple indexing of automatic feed unit for fully-automatic feed to 141.6"
*Saw table and blade can be swiveled to 180°
*Section being cut is clamped on both sides of blade
*Two speed saw blade motor
*Built-in coolant system
*Material clamping pressure control
*Presetting of rear vises without tools
*Presetting of cutting depth with hand wheel and scale
*Amp meter monitors sawblade life (complete with auto shut-off)
*Piece counter for entering number of pieces desired
*Safety interlock feature ( blade will not feed if clamp is not holding material securely)
*Lockable feed regulator
