No competitive machine can come close to matching the Oliver ACE for payout on capital invested.  Set-up and grinding times are at an absolute minimum to give increased output from your cutting grinding department.  The ACE is simple and fool-proff to operate.  All readings are made on a direct basis and it is not necessary to make intricate computations.  This eliminates the need for skilled cutter and tool grinders with a consequent reduction in labor cost for each reconditioned tool.

The construction of all model 300HD cannot be matched by any competitive unit from either a quality or maintenance standpoint.  All of the sensitive areas are above the grinding line and away from any grit or abrasive matter.  In addition, the ways are all enclosed in a dust tight bellows type enclosure to insure maximum life.  The ram reciprocates on balls riding on several hardened ways with only fingertip pressure required for movement.  A precision type permanently lubricated grinding wheel spindle is supplied.  Radial thrust ball bearings are used in combination with a spring pre-load system to give you one of the best grinding spindles in the industry.  The work spindle is hardened and ground and is complete with a special feature-a 24 division index plate for those jobs where fingers are difficult to use.

Specifications:

Maximum distance between centers:	15”
Swing on centers:	8”
Cross carriage travel:	14”
Angular adjustment of carriage:	180 deg
Angular adjustment of spindle head:	180 deg
Angular adjustment of table-vert plane:	45 deg
Maximum distance wheel to tilting table:	9-1/2”
Maximum distance wheel to base table:	26”
Maximum horizontal travel of grinding unit:	7”
Grinding wheel spindle speeds:	4800, 3800, 3200 RPM
Diameter grinding wheel:	4”, 5”, 6”
Vertical adjustment of grinding wheel:	1-1/2”
Motor:	1 HP
Overall size:	30” x 60” x 68 H
Approx weight:	1,500 lbs

Equipped with:

• Universal fixture
• Grinding wheel