Specifications:

Working range:	8-50mm (0.32" - 2") dia. chip forming
	8-90 mm (0.32" - 3.5") dia. chip forming & chipless
Cutter-head speeds:	infinitely adjustable 100-1000 rev/min
Chamfering speed:	25-1200 rev/min
Tool feed:	0 - 0.3 mm/rev.
Length stop:	5-500 mm (.196" - 19.7")
Electrics
Spindle drive:	5.0 kW (6.8 HP)
Hydraulic motor:	4.0 kW (5.5 HP)
Chamfer motors:	2 ea - 2.5 kW (3.5 HP)
Coolant pump:	0.5 kW (0.7 HP)
Bar feed motor:	0.5 kW (0.7 HP)
Loading magazine:	0.8 kW (1.0 HP)
Voltage:	460 volt, 3 phase, 60 hz - 34 Amps
Overall dimensions:
Cut-off & chamfering unit:	84" long x 75" wide x 80" high - 5300 lbs.
Loading magazine:	18' long x 3' wide x 4-1/2' high - 1825 lbs.
Switchgear cabinet:	48" long x 16' wide x 75" high - 838 lbs.

Features:

• The spindle drive of the cut-off machine and chamfering are powered by their own motors.
• Stock clamping, tool feed, work piece removal and transfer, and also the clamping devices and feed of the the end working facility are hydraulically controlled by and electric/electronic program circuit
• The hydraulics are driven by a separate unit
• The program sequence is governed by a stored program control “SPS”.
• An error diagnostic display in the control panel indicates any faults occurring and allows them to be pinpointed easily and immediately.
• An assortment of collets, clamping jaws and cut-off and chamfering tools are included with the machine – can be cataloged upon inspection.