Specifications:

Capacities:
            Nominal:         17” x 20”
            Rounds:          17”
At 45º left:                   17” x 11.5”
            Rounds:          13.5”
At 45º right                  17” x 13.5”
            Rounds:          13.5”

Speed Range:            60 – 400 fpm (infinitely variable, hydraulically controlled)
Feed rate:                  0 to 300 lbs. (infinitely variable)
Blade:                       14’6” x 1.25” wide x .042” thick
Table surface:            30” wide x 27” long
Vise opening:             21-½” maximum
Motors:
            Main drive:     10 HP, 1800 rpm TEFC, ball bearing
            Coolant:         ¼ HP, 2600 rpm
            Electrics:        wired for 460 volt, 3 phase, 60 hertz
Shuttle feed table:      10 foot long
Weight capacity:        14,000 lbs.
Feed length:               24” per stroke, 19 strokes available for maximum of 456”
Dimensions:               179” long  x 97” wide x 89-¾” high
Weight:                      8,000 lbs (approx.) 

Equipped with:

• Programmable Control

Micro processor control unit with dual -numeric display and operator key pad fo
1) setting cut-off lengths up to 24” (610 mm) per single index or longer, using multi-cycle feature,
2) presetting number of pieces to be cut. Inch/metric capability, and
3)to preset angles for miter cutting.  Memory feature permits storing preset cut-off length, angle  and number of pieces for up to 99 jobs.  Includes out-of-stock shut down device 

• 3 Degree Canted Head
• Work-Lift-Roller on infeed of machine bed
• Optional Outboard Table Vise