Equipped with:

• A unique swing head design.  The head swings through an arc from 90 degree to 30 degree (60 degree of swing).  The angle is set remotely at the console.
• Carbide guides provide long life, consistent accuracy and reduced vibration.
• A hydraulic servo control allows the machine to react to the section of material being cut, as well as allowing the operator to adjust both feed force and feed rate independently.
• A powered blade brush cleans blade gullets.
• Heavy duty motor, reducer and variable drive assembly allows the operator to infinitely adjust blade speed from 75 – 400 sfm.
• Hydraulic blade tension ensures constant and accurate blade tension.
• The shuttle stroke is adjustable from 0 – 40” by use of an adjustable stop.  A micrometer head is used for fine adjustment.  An accuracy of ±.005” per shuttle is assured.
• The three vise shuttle system incorporated a “floating” shuttle vise which ensures accurate indexes when working with warped stock.  The vises are long stroke and controlled at the console.

MACHINE SPECIFICATIONS

Capacity:	Round                                      Rectangular
At 45  angle:	18” diameter                          18” high x 27” wide 18” diameter (round)
At 30  angle:	12” diameter (round)
Blade:	18’ 10” x 1-1/2” x .050”
Blade speed:	75 – 400 spm (infinitely variable)
Blade tension: Blade guides:	hydraulic carbide (coolant lubricated)
Blade wheel diameter:	22”
Motors:	blade drive                                          hydraulic drive 10 HP                                                   3 HP
Pumps
Hydraulic pump:	pressure compensated
Constant pressure:	6-1/2 gpm variable flow (maximum)
Coolant pump:	3-1/2 gpm (150w)
Hydraulic tank:	20 gallon
Vise Control:	hydraulic (remote switch)
Shuttle stroke:	0-40” single stroke
	multi-shuttle capability of up to 99 strokes
Table height:	36’
Machine weight:	7,300 lbs.
Maximum work load:	8,000 lbs.
Overall dimensions:	111” wide, 160” long, 72” high