MTX Specifications:	Y Axis
Max. pressure (US tons)	33
Y axis with Multitool	50"
Y axis with single tool	51.18"
X axis	80"
Automatic repositioning up to	32'
Max strokes per./min. nibbling to	750
Punching 1" Centers	360
Table dimensions	90.30 x 157.48
Motor HP	7.3
Punch Max Diameter	3.5"
Standard Clamps max. opening	.433

 

 

 

MTX Features

 

 

Graphic Icon And Conversational control

• User Friendly control that allows anyone
  in the shop to program using the graphic icons
• Tooling Library
• Program Modify
• Block Nesting
• Automatic Tool Set-up
• Job Run Time
• Program Delete
• Program Save and Recall   

 

 

 

 

 

 

 

Tool Management Panel

• 
  Rotation of Turret for loading              
• Punch head Retract
• E-Stop
• Hydraulics Open / Close
• Punch Mode Selector (single stroke,
  automatic and jog sequence)

 

 

 

 

 

 

 

MTX1250/30-2000 CNC

 

 

 

 

Turret Configuration

• Innovative CNC Multi-Turret
• (5) Five 3 ½ “ stations configured
  for Thick Turret tooling. Total Flexibility with each station with the ability to use a 4, 6 or 10 stationmultitool in any
  of the five stations.
• 2 of the Stations Rotate into any direction from 0-360 degrees

 

 

 

 

CNC Programmable

• 12.1” LCD display panel with adjustable
  background Illuminations
• Motorola 6800 Celeron processor with
  3.2 GB Hard drive and 64 Mb RAM
• Graphic icons for easy punching functions  (notching, nibbling and nesting) for fast, easy part programming
• 3.5” floppy drive

 

 

 

 

 

 

 

Rigid Cast C-Frame

• The rigid C-Frame is a monoblock Mechanized
  steel casting
• Mechanized casting virtually eliminates
  deflection and Lateral movement to ensure
  long tool life

 

 

 

 

 

 

 

Hydraulically Powered

• Ensures accurate tool positioning and alignment
• Enables quick tool changeover in seconds
• Dwell Cycle for Scribing and Linear Forming
• Capable of generating full tonnage at any point in the
  stroke     
• Programmable stroke
• Ability to perform forming operations such as louvers,
  knockout, fins & flanges   

 

 

 

 

                          

Material Positioning System

• Automatic Clamp positioning controlled
  via the CNC Console. (true hands-off set-up)

                                                       

 

Equipped with:

XMTE, 6 Station MultiTool for tools up to 24mm dia. and up to ¼” thick capacity

Ball Transfers in Table Along with Brushes