Specifications:

X Axis stroke:	122”
Y Axis stroke:	86.6”
Z Axis stroke:	33.4”
W Axis:	+/- 360 degrees
U Axis:	+/- 180 degrees
H Axis (height sensing):	+/- .39”
Max workpiece size:	122.0” x 86.6” x 33.4”
Max workpiece weight:	4,400 lbs
Max processing feedrate:	(X,Y,Z) 984 IPM
Max processing feedrate:	(W,U) 180 degrees per second
Table pass height:	25.6”
Rapid travel speed:	(X,Y) 1378 IPM
Rapid travel speed:	(Z) 984 IPM
Rapid travel speed:	(W,U) 180 degrees per second
Repeatability:	(X,Y,Z) +/- .00059”
Machine dimensions:	172.8” w X 161.4” h X 307.2” d (main machine only)
Machine weight:	17,600 lbs (main machine only)

EQUIPPED WITH:

Resonator:

3,000 watt peak, 2000 watt constant, 3020D resonator
Excitation method:    3 axis cross flow, SD
Control method:         power feedback
Power stability:          +/- 1%
Beam mode:              low order (main component TEM 01)
Beam outer diameter: 0.83”
Beam divergence:    (mrad): approx 2.5 pr less (total angle)
Wave length:              ([m): 10.6
Frequency setting range: (Hz): 10-3000
Duty range:                1-100% adjustable
Output power adjustable range: 0-100% of rating
Rensonator unit dimensions: 78.3” w X 63.8”h X 18.1”d
Rensonator unit weight: 2,650 lbs

Laser Gas
Composition: C02: C0: N2: HE / 8:4:60:28
Composition amount: 2 liter/hour
Gas sealing time: 12 hours (during rated continuous oscillation)

Control Unit
Floppy disk: 1.44 MB IBM compatible
Hard disk drive capacity: 2.0 GB or 16000000 points
Graphic display: 10.4” TFT color led
Mounting: Onto processing machine
CPU / type: 64 bit / PC
Program memory size: 5000m or 32000 points
Minimum command unit: .0001”

MACHINE FEATURES

-(2) Motorized pallets: 86.6” x 122” each
-Rigid Machine Design on Hybrid Frame - Designed using CAE (Computer Aided Engineering) guarantees increased accuracy and repeatability.
 -Large Work Piece Capacity - The machine can handle a work piece up to 4400 lbs.
-Zero Offset Processing Head incorporates water-cooled optics for less thermal stress. -Independent Height control (6th axis) has a stroke of + .39”, which allows faster tracking performance. (23.00 ” with pallet loader)
-+ 360º W-axis stroke.
-The Newly Designed AC Smart Servo Drive System – Provides unsurpassed cutting accuracy and high-speed positioning.  The AC Smart Servo is complete with absolute encoders.
-Minimal Warm Up Time only 45 seconds
-Quick Exchange collimation mirror.
-Part Teaching Aid incorporates a visible laser.
-Capacitance height sensing incorporates dual damage reduction mechanism with no ceramic parts. 
-5.0” focal length Processing lens.