FRIGGI VERTICAL BANDSAW
New Friggi Semi-Automatic Vertical Block Cutting Bandsaw
Model SV 630 TS
Stock W-1307

The SU 630 TS is a Vertical Band Sawing Machine with a sliding Table, engineered to efficiently and quickly cut Ferrous and Light Alloy material. The main feature is the moving Table determining the cutting action, while the material remains stable in place.

Technical Data

Throat 22” (600 mm)
Cutting height 15” (400 mm)
Wheels Diameter (Ø) 2 x 24”  (2 x 630 mm)
Working table stroke 26”  (700 mm)
Working table dimensions 33” x 45”  (850 x 1150 mm)
Blade Dimensions 185” x 0.1”-1” (4700 x 3-27 mm)
Blade speed 50 – 3190 sfm  (15 ÷ 970 m/min)
Blade motor power 2.1 - 3 Hp ( 1.5/2.2 Kw)
Hydraulic power pack motor power 2 Hp (1.5 Kw)
Installed power 5Hp (3.5 Kw)
Main supply 480 V – 60 Hz 
Overall dimensions Width
Length
Height 
Working table height 		59”  (1500 mm)
86” (2200 mm)
93” (2350 mm)
50” (1255mm)
Weight Kg 900 2000 lbs.

Technical features are only for guidance. FRIGGI SRL reserves the right to modify these data at any time without notice

Machine Equipment and Features

1. Reinforced Robust Steel Base

  • The one piece steel base is the Main Support for entire machine, includes leveling and support bolts.
  • Guides for the Traveling Table are mounted onto the Steel Base

2. Heavy Duty Sawing Unit and Head Assembly

  • Bandsaw rotation is achieved by a belt and a pulley via a mechanical double speed gear-box. 
  • Head assembly includes two (2), Band wheels
  • Blade tensioning is achieved by means of a manual flywheel
  • Band wheels are easily accessible behind protective sturdy panels, each having safety limit switches preventing the running of the machine when panels are open
  • Bandsaw speed is adjustable by means of a manual flywheel and the obtained value is visualized on a digital display mounted on the column.

 3. Table

  • The heavy duty Work Table has been machined to provide a smooth surface
  • An Edge is located on the table (perpendicular to the cutting line) providing a limit for the material
  • The Table moves along ball bearing guides, controlled by a Hydraulic cylinder
  • A hydraulic adjuster enables the adjustment of the table speed.

4. Guide Arms

5. Flood Coolant System

  • Coolant tank is located inside the machine base, The coolant is dispersed by means of a submergible coolant pump delivering coolant directly onto the blade through the Guide Arms
  • Coolant pump automatically starts with the Blade start

6. Hydraulic System

  • Consisting of a power pack
  • Available adjustment includes: Table feed

7. Electrical System

  • Constructed in accordance with the European current safety regulations (EN60204-1)
  • All electrical connections on the machine are inside connector blocks on a terminal board that can be inspected
Note:
Purchaser is responsible for any necessary foundation preparation and installation of proper electrical cable from the power source to the machine.
External interference: The purchaser should check and advise before the issuance of a purchase order for any possible presence of electric jamming and/or mechanical impedance that may prevent/compromise the proper operation of the machine.

8. Controls and Control Panel

  • Located onto the machine base, the control panel includes all buttons and selector switches for the manual and semiautomatic cycle including a Emergency Stop button

Manual Cycle:
In Manual mode all machine functions can be carried out subject to the door panels being closed and locked.

Semi-Automatic Cycle
In Semi-Automatic mode the machine makes a single cut - the following actions are carried out:

  1. Blade coolant starts
  2. Blade starts running
  3. Table feed starts
  4. The Cut is made
  5. Table stops
  6. Blade & Coolant stop

9. General

Friggi Vertical Bandsaw, Model SU 630 TS, Semi-Automatic, Block Cutting, New